Contents
It goes over the purpose of longboarding slide gloves, the difference between an average and an amazing slide glove, and even recommends some gloves that are perfect for all riders.
| Product | Our Rating | Additional Info |
|---|---|---|
 |  | See Additional Reviews |
 | | See Additional Reviews |
 |  | See Additional Reviews |
 |  | See Additional Reviews |
Purpose of Slide Gloves
Choosing a pair of sliding gloves can either help greatly or hurt your sliding experiences. In a typical Coleman slide, the rider reaches back with his right hand to provide a point of contact with the ground and to help push the longboard out from under his feet.
Longboarding slide gloves help you maintain your balance during a slide. As you are essentially leaning back to shift your center of gravity, the most common method of getting hurt is simply falling backwards off the board.
The perfect slide glove helps govern the entire slide from start to finish and makes it easier. It’s not necessary for riders to wear longboard slide gloves or even touch the ground during a slide. From experience, however, any promising beginner longboarder should wear slide gloves.
Slide Gloves Dissected
There are 3 main parts of every slide glove used for longboarding. These parts are the glove, the puck, and the wrist strap.
The glove is the main part and provides the main protection for your hand. Typically the glove is made out of a lightweight and flexible material. The best slide gloves incorporate harder fabric around key points such as the knuckles of the rider.
The puck is the part of the glove that makes contact with the road. As the puck experiences a lot of friction when the rider places it against the ground, it is made out of a hard material such as plastic. Pucks made out of a soft material wear out quicker and function worse than others which is how you can tell a good slide glove from a bad one.
The wrist strap allows the glove to be tightened against the wrist so that it constantly stays on your hand throughout multiple slides. It also can help prevent spraining your wrist if you fall over while sliding.
How to choose the best slide gloves
With so many options on the market today for longboard slide gloves, it can be hard to determine which brand or option to buy. There are, however, a number of key parts of a slide glove that are required to make a good longboard glove.
One of the most important parts is the weight and overall shape of the glove. You want a glove that allows for free movement of your hand and each of your fingers. It has to be lightweight also to make sure you don’t feel like you have oven mitts attached to each hand.
Another thing you should look for in a high-quality slide glove is the fabric and stitching in its construction. Slide gloves are designed to rub against the rough pavement which means they need to be able to take a lot of abuse.
Make sure to look for gloves made out of enhanced fabrics such as leather which is a highly resistant fabric. Also, ensure that the glove has strong stitching so it won’t tear as you’re sliding it across the pavement.
Replacing your slide gloves every 2 weeks is no fun and it shouldn’t be necessary. Just make sure to choose the right pair of slide gloves first so you can avoid the hassle of grabbing another pair when yours fails.
Recommendations for Longboard Slide Gloves
Triple 8 Sliders Longboard Glove
Click here for additional reviews, photos, and pricing information!
One of the best selling accessories for longboarders on the market today, the Triple 8 Sliders are made out of full top grain leather meaning they are meant to last. To supplement the protection, the finger tips are lined with tear-resistant Kevlar.
One nice feature of these gloves is that the puck is held on by Velcro meaning it can be replaced as the puck slowly wears down. This allows you to simply buy additional pucks instead of buying entirely new gloves as you continue sliding with these.
Loaded Longboard Free Ride Slide Gloves
Click here for additional reviews, photos, and pricing information!
The heavy duty version of slide gloves, these slide gloves are what professionals wear daily on their runs. They are still affordable for the average longboarder though and are guaranteed to last a lifetime through their high quality.
The glove is made out of a mix of tear-resistant materials with provides flexibility for the hand and protection. To prevent your hands from overheating, it also incorporates a Coolmax lining and vented mesh.
The pucks on these gloves come in two different sizes: small and large. If you are just starting sliding, I would recommend the large size pucks as they will increase your stability.
Sector 9 Apex Longboard Slide Gloves
Click here for additional reviews, photos, and pricing information!
With a vibrant pattern, these slide gloves incorporate a lightweight design with a small puck for the ultimate mix of comfort and usefulness.
These gloves don’t have additional pucks underneath the fingers as the previous slide gloves did but that simply means they’re cheaper. The main puck is a Delrin 9 Ball which comes with 3 mm anti-vibration foam to dampen vibrations as you’re sliding down the road.
Sector 9 BHNC
Click here for additional reviews, photos, and pricing information!
Another vibrant and lightweight design from Sector 9, these slide gloves are the cheapest on this list which is probably why they’re so popular. To provide protection, stressed areas are double stitched and the fingertips are lined with Kevlar.
The puck is made out of Delrin and allows for riders to smoothly control their speed and control during a slide. To place it securely on your hands, it comes with a Velcro wrist strap.
